Pro-source SF-742 Ratcheting Tube Pipe Cutter 1/2 to 1-5/8 in

Product Description

The PRO-SOURCE SF-742 is a ratcheting hand tube and pipe cutter designed for cutting plastic, rubber, PVC, and CPVC pipe and tubing in the field or shop. It accepts tube and pipe ranging from 1/2 inch minimum to 1-5/8 inch maximum outside diameter and measures 7 inches overall length, making it compact enough for tight spaces common in plumbing and HVAC rough-in work. The ratcheting mechanism allows controlled, incremental cuts without requiring a full-rotation swing, which is useful when working in confined areas around framing, walls, or mechanical equipment. At 1.1 pounds, it is light enough for one-hand operation during extended use.

The SF-742 is suited for residential and light commercial plumbing, HVAC refrigerant line work, and pool or irrigation system installations where plastic and rubber tubing are common. It handles the material types most frequently encountered on service calls and new-construction rough-ins, including PVC drain and supply lines, CPVC hot and cold supply, and flexible rubber tubing. Plumbers, HVAC technicians, and pipe fitters will find it a practical addition to a standard tool kit for cutting non-metal tubing without a reciprocating saw or pipe saw.

Key Features

• Ratcheting cut action allows use in confined spaces without full blade rotation
• Cuts plastic, rubber, PVC, and CPVC tubing and pipe
• Capacity range of 1/2 inch to 1-5/8 inch outside diameter
• 7-inch overall length keeps the tool compact and portable
• Lightweight at 1.1 pounds for one-hand use during field work

Compatibility

Designed for use on plastic, rubber, PVC, and CPVC tube and pipe with outside diameters between 1/2 inch and 1-5/8 inch. Not intended for copper, steel, or other metal tubing.

Installation Notes

No power source is required for operation. Before cutting, verify pipe or tubing is properly supported on both sides of the cut to prevent binding on the blade. Mark the cut line clearly and align the blade squarely to avoid angled cuts that can affect fitting seating. Follow applicable plumbing codes such as the IPC or local jurisdiction requirements for pipe preparation and joint assembly after cutting.