Pro-source PS-AZB0160 Outdoor Extension Cord 25 Ft 15A

Product Description

The PRO-SOURCE PS-AZB0160 is a 25-foot, 14/3 SJTW outdoor extension cord rated for 15 amps and built for jobsite and service environments. The cord carries three 14 AWG conductors inside a flexible SJTW jacket, which resists moisture, sunlight, and abrasion. It terminates with a NEMA 5-15P plug on one end and a single NEMA 5-15R receptacle on the other. The blue and red jacket coloring makes it easy to identify on a busy jobsite. At 2.75 pounds, it coils and stores without bulk. Licensed electricians and field service technicians reach for this cord when a durable, code-recognized temporary power run is needed for tools or equipment.

This extension cord is suited for outdoor temporary power applications in residential construction, commercial service work, and industrial maintenance settings. Common use cases include powering portable tools, HVAC service equipment, and electrical test instruments in locations where a permanent outlet is not accessible. The SJTW jacket rating confirms suitability for outdoor use in wet or damp conditions. The 15-amp capacity matches standard 15-amp branch circuits protected by a 15-amp breaker, making it a direct fit for most general-purpose tool loads.

Key Features

• 25-foot length provides reach from outlet to work area without daisy-chaining cords
• 14 AWG, 3-conductor construction handles 15-amp loads with minimal voltage drop over the run
• SJTW jacket rated for outdoor use in wet and damp environments
• NEMA 5-15P plug and single NEMA 5-15R receptacle for compatibility with standard 15-amp circuits
• UL Listed and meets OSHA specifications for temporary power use on job sites
• Distinctive blue and red jacket aids cord identification in multi-cord setups

Compatibility

Designed for use with tools, equipment, and service instruments that draw up to 15 amps and accept a standard NEMA 5-15 connection. Suitable for outdoor and indoor temporary power applications on 120-volt, 15-amp branch circuits.

Installation Notes

Temporary power cords of this type are typically deployed by electricians or qualified service technicians following NEC Article 590 guidelines for temporary wiring on construction and maintenance sites. Inspect the jacket and plug blades for damage before each use and do not deploy a cord with exposed conductors or a cracked jacket. Do not exceed the 15-amp rating of the cord or the ampacity of the circuit it is connected to. Coil and store the cord loosely to prevent jacket cracking and conductor stress.