Pro-source PS-AZB0080 Outdoor Extension Cord 50 Ft 12/3

Product Description

The PRO-SOURCE PS-AZB0080 is a 50-foot, 12/3 SJTW outdoor extension cord rated for 15 amps. It features three conductors in a 12-gauge build, making it suitable for tools and equipment that draw significant current on job sites or in outdoor service work. The SJTW jacket is designed to resist moisture, sunlight, and abrasion, which are standard demands in outdoor electrical applications. The cord ships with a single NEMA 5-15P plug end and one receptacle outlet. Electricians, HVAC techs, and general contractors use cords in this class when temporary power runs are needed at a safe, low-voltage drop over distance.

This cord is intended for outdoor use in residential and light commercial settings. Typical applications include powering portable tools, temporary lighting, HVAC service equipment, and other 120-volt loads during installation or maintenance work. The 12-gauge conductor size reduces voltage drop over the full 50-foot run, which protects motors and electronics connected at the far end. The orange and blue jacket color combination aids visibility on busy job sites. It meets OSHA specifications and is UL Listed for outdoor service.

Key Features

• 50-foot length supports extended temporary power runs with manageable voltage drop
• 12-gauge, 3-conductor (12/3) construction handles up to 15 amps continuous
• SJTW jacket rated for outdoor use — resists moisture, UV exposure, and abrasion
• NEMA 5-15P plug configuration for standard 120-volt grounded outlets
• Single receptacle outlet at the load end
• UL Listed and meets OSHA specifications for job-site use

Compatibility

Designed for use with 120-volt, 15-amp grounded circuits and equipment fitted with standard NEMA 5-15 plugs, typical of portable power tools, service equipment, and temporary lighting used in outdoor trade applications.

Installation Notes

This cord should be installed by a qualified electrician or trade professional in compliance with NFPA 70 (NEC) requirements for temporary wiring. Inspect the cord before each use for cuts, fraying, or damaged plugs, and do not use if the jacket is compromised. Never exceed the 15-amp rating, and do not daisy-chain multiple extension cords together for permanent or semi-permanent wiring. Coil and store the cord loosely to prevent heat buildup and jacket damage during extended use.