Pro-source PS-30483 Portable Electric Salamander 102390 Btu

Product Description

The PRO-SOURCE PS-30483 is a portable electric salamander heater built for heavy-duty temporary heating on construction sites, industrial facilities, and large work areas. Rated at 102,390 BTU/h and operating on 480 volts three-phase power at 36 amps, this unit delivers high-output forced air heat through a 1,900 CFM airflow capacity. A built-in thermostat allows on-site temperature control, while an integrated overheat protection system adds a layer of safety during extended operation. Rubber wheels make repositioning across concrete, wood, and other floor surfaces straightforward without additional equipment. At 83 pounds, the unit is substantial but designed for practical jobsite mobility.

The PS-30483 suits temporary heating applications in commercial construction, industrial maintenance shutdowns, warehouses, and large enclosed work areas requiring high-capacity forced air heat. Because it draws 480V three-phase power, it is best suited for sites with established three-phase electrical service, such as commercial construction projects or industrial plants. Licensed electricians or qualified contractors typically handle the power connection before mechanical or construction crews operate the unit for space conditioning or equipment warm-up.

Key Features

• 102,390 BTU/h output for high-capacity temporary heating in large spaces
• 480V three-phase operation at 36 amps for industrial-grade power draw
• 1,900 CFM forced air delivery for rapid space heating
• Built-in thermostat for on-site temperature regulation
• Integrated overheat protection for safer extended operation
• Rubber wheels for repositioning across any floor surface without tools

Compatibility

Designed for use on jobsites and facilities with available 480V three-phase electrical service; suitable as a portable temporary heating solution for construction, industrial, and commercial applications.

Installation Notes

Connection to 480V three-phase power must be performed by a licensed electrician in accordance with the National Electrical Code (NEC). Verify that the available circuit capacity supports a 36-amp continuous load before connecting. Ensure adequate ventilation in the work area during operation and never place the unit in contact with flammable materials or in enclosed spaces without proper airflow. Power down and disconnect from the supply circuit before performing any inspection or maintenance.