Pro-source PRO564446 Pleated Air Filter 16x30x2 Merv 8

Product Description

The PRO-SOURCE PRO564446 is a MERV 8 wire-backed pleated air filter designed for residential and light commercial HVAC systems. Sized at 16 x 30 x 2 inches nominal, this filter uses a synthetic pleated media supported by a wire backing to maintain pleat geometry under airflow. The beverage board frame provides structural integrity during installation and service cycles. Rated for airflow up to 1,667 CFM at a maximum face velocity of 500 FPM, it delivers balanced filtration efficiency with low initial resistance starting at 0.14 inches w.g. MERV 8 performance captures a broad range of common airborne particulates. Licensed HVAC technicians and building maintenance professionals handle routine installation and replacement.

This filter fits any forced-air system that accepts a 16 x 30 x 2 inch nominal filter. Typical applications include residential split systems, packaged rooftop units, air handlers, and furnaces where moderate filtration is required without excessive static pressure drop. The wire-backed construction is particularly suited to higher-velocity return air applications where unsupported media would collapse or deform. The filter is rated for continuous operation up to 150 degrees F, making it appropriate for both heating and cooling system configurations.

Key Features

• MERV 8 filtration rating for moderate particulate capture efficiency
• Wire-backed pleat construction maintains media shape at airflow velocities up to 500 FPM
• Synthetic media provides consistent filtration performance across the filter life cycle
• Beverage board integrated frame for rigid fit in standard filter tracks
• Low initial resistance of 0.14 inches w.g. at 375 FPM minimizes system static pressure impact
• Maximum temperature rating of 150 degrees F suits both heating and cooling applications
• UL 900 listed

Compatibility

Rated for use with any forced-air HVAC unit accepting a 16 x 30 x 2 inch nominal filter. Actual dimensions are 15.5 x 29.5 x 1.75 inches to allow proper seating in standard filter tracks.

Installation Notes

Installation should be performed by a qualified HVAC technician or trained maintenance professional. Always shut down the air handler or furnace and confirm the system is de-energized before removing or inserting the filter. Confirm airflow direction arrows on the filter frame align with system airflow direction toward the blower. Follow equipment manufacturer guidelines and applicable local mechanical codes for filter maintenance intervals.