Pro-source PRO40046-P Merv 15 Pleated Air Filter 24x24x12

Product Description

The PRO-SOURCE PRO40046-P is a MERV 15 V-Bank mini-pleat air filter designed for high-efficiency filtration in commercial and industrial HVAC air-handling systems. Constructed with a microfiberglass media in a V-bank configuration, it delivers a rated airflow of 2,500 CFM at a nominal size of 24 x 24 x 12 inches. The plastic frame integrates directly with the filter cell for structural rigidity without added hardware. This filter is installed by HVAC technicians and facility maintenance professionals requiring high-efficiency particulate capture in critical-environment or clean-air applications.

This filter is suited for commercial air-handling units, dedicated outdoor air systems, and other ducted HVAC applications where high particulate efficiency is required. The V-bank design increases media surface area within a compact depth, allowing higher airflow with lower face velocity and extended service life. With a maximum operating temperature of 150 degrees F and a maximum face velocity of 750 FPM, it fits demanding commercial installations where sustained airflow and filtration integrity are priorities. UL 900 listing supports use in systems where flame-spread ratings are required by code or specification.

Key Features

• MERV 15 efficiency rating for high-performance particulate capture
• V-bank mini-pleat microfiberglass media maximizes surface area within a 12-inch depth
• Rated at 2,500 CFM with a maximum face velocity of 750 FPM
• Initial resistance of 0.24 inches w.g. at 375 FPM, 0.34 at 500 FPM, and 0.45 at 625 FPM
• Integrated plastic frame eliminates the need for separate holding hardware
• UL 900 listed for flame-spread compliance in commercial systems

Compatibility

Designed as an OEM-style replacement for commercial air-handling units and HVAC systems accepting 24 x 24 x 12 inch V-bank mini-pleat filter cells rated at MERV 15.

Installation Notes

Installation should be performed by a qualified HVAC technician. Power down and lock out the air-handling unit before removing the existing filter. Confirm airflow direction markings on the filter frame align with the system airflow direction before seating the filter in the holding frame. Verify the housing accepts the actual dimensions of 23.38 x 23.38 x 11.5 inches to ensure a proper seal and prevent bypass.