Pro-source PRO23210101 Air Filter Media Pad Merv 7

Product Description

The PRO-SOURCE PRO23210101 is a MERV 7 polyester media filter pad designed for use in air handling units, commercial HVAC systems, and light industrial ventilation applications. Measuring 10 x 10 x 1 inch, this flat-panel media pad delivers 89.4% arrestance efficiency and captures 25% of target particles at the tested particle size range. It carries a UL 900 listing and incorporates a dry tackifier finish that helps trap and hold airborne particulate. Maximum working temperature is 150 degrees F, and the pad is rated for airflow up to 300 feet per minute with an initial resistance of 0.10 inches water gauge at that velocity. HVAC technicians and filter maintenance crews install this pad as a primary or pre-filter stage.

This media pad is suited for residential and light commercial air handlers, make-up air units, and cabinet-style air filtration systems that accept standard flat-pad media. It is well matched to applications requiring moderate particulate capture without high static pressure drop. At 300 FPM the pad moves up to 208 CFM, making it appropriate for single-zone and multi-zone systems with relatively modest airflow requirements. The 1-inch depth fits a wide range of standard pad-style filter housings. Units are sold individually, though a minimum order quantity of 40 applies.

Key Features

• MERV 7 rating with 89.4% arrestance efficiency for moderate particulate capture
• Dry tackifier finish helps retain captured particles and reduces re-entrainment
• UL 900 listed media construction
• Rated to 150 degrees F maximum working temperature
• Low initial resistance of 0.10 inches w.g. at 300 FPM reduces blower load
• Polyester media construction resists moisture and dimensional distortion

Compatibility

Compatible with any unit accepting a flat pad-style media filter insert. No specific brand or model compatibility data was provided in the product source information.

Installation Notes

Installation is typically performed by HVAC technicians or trained maintenance personnel. Power down the air handler and close the outdoor air damper before accessing the filter section. Verify that the housing dimensions match the pad size before installation, and confirm that the final resistance rating of 1.0 inches w.g. is within the system fan curve tolerance before placing into service. Replace pads when final resistance is reached or when visual inspection indicates media loading.