Pro-source PRO12212 Panel Air Filter Merv 7 12 Inches

Product Description

The PRO-SOURCE PRO12212 is a panel air filter media roll rated MERV 7, designed for use in commercial and residential HVAC air-handling applications where continuous roll media is required. Constructed from polyester with a dry tackifier treatment, it delivers an arrestance efficiency of 89.4 percent and captures 25 to 30 percent of targeted particles at a maximum airflow velocity of 300 feet per minute (FPM). The roll measures 12 inches wide by 90 feet long and is 1 inch thick, making it a practical choice for high-volume filter replacement programs. It is listed to UL 900 and rated for continuous operation up to 150 degrees F. HVAC technicians and facility maintenance professionals install this media in roll-fed filter housings or cut-to-fit applications.

This filter roll suits any unit accepting roll media or panel-style filter stock, including air handlers, makeup air units, and roll filter frames found in light commercial and industrial settings. The 12-inch width and 90-foot roll length allow technicians to cut sections to match a wide range of filter housing dimensions, reducing the need to stock multiple pre-cut filter sizes. The dry tackifier on the polyester media helps capture dust and particulate without requiring adhesive sprays or additional pre-treatment.

Key Features

• MERV 7 rating with 89.4 percent arrestance efficiency
• Polyester media with dry tackifier for effective particulate capture
• 25 to 30 percent particle capture efficiency across rated particle size range
• Maximum airflow velocity of 300 FPM keeps static pressure losses manageable
• Initial resistance of 0.100 inches w.g.; final resistance of 1.000 inches w.g.
• Rated for temperatures up to 150 degrees F
• UL 900 listed

Compatibility

Designed for use with any unit accepting roll or panel-style air filter media. The 12-inch wide roll can be cut to fit a broad range of roll-filter frames and air handler filter sections.

Installation Notes

Installation should be performed by a qualified HVAC technician or trained maintenance professional. Power down the air handling unit and confirm the system is off before accessing the filter section. Cut media to the required panel dimensions using a straightedge and utility knife, and verify proper airflow direction before securing the media in the frame or housing. Dispose of used filter media in accordance with local waste regulations.