Pro-source PRO10493 Pleated Air Filter 16x16x2 Merv 10

Product Description

The PRO-SOURCE PRO10493 is a wire-backed pleated air filter rated MERV 10 with 55% particle capture efficiency. Built on a rigid paperboard frame with a synthetic pleated media, it delivers 875 CFM airflow capacity at a maximum face velocity of 500 FPM. The wire backing supports the media under load, maintaining pleat geometry and consistent pressure drop across the filter's service life. Initial resistance measures 0.24 inches water gauge at 500 FPM, with a final resistance of 1.0 inch water gauge. Licensed HVAC technicians and building maintenance professionals install this filter in forced-air systems as part of routine preventive maintenance.

This filter fits residential and light commercial forced-air heating and cooling systems with a 16 x 16 x 2 inch filter slot. The nominal dimensions are 16 x 16 x 2 inches, with actual dimensions of 15-1/2 x 15-1/2 x 1-3/4 inches — a standard undersized tolerance that ensures proper fit in framed filter racks and cabinet slots. MERV 10 filtration targets mid-range particulates including fine dust, pollen, mold spores, and pet dander, making it appropriate for environments requiring filtration above basic fiberglass but without the static penalty of higher-rated media. The filter is rated for continuous operation up to 200 degrees F.

Key Features

• MERV 10 rated at 55% particle capture efficiency per ASHRAE 52.2-2012
• Wire-backed pleated synthetic media maintains pleat shape under airflow pressure
• 875 CFM rated airflow at up to 500 FPM maximum face velocity
• Low initial resistance of 0.24 inches water gauge at 500 FPM
• Rigid paperboard frame with integrated construction for secure rack fit
• Rated for environments up to 200 degrees F
• Compliant with ASHRAE 52.2-2012 and UL 900 standards

Compatibility

Designed for use with any forced-air HVAC unit accepting a 16 x 16 x 2 inch nominal filter, including residential air handlers, furnaces, and light commercial fan coil units.

Installation Notes

HVAC technicians and facilities maintenance personnel install this filter. Power down or set the system to off at the thermostat before opening the filter cabinet or rack. Confirm actual slot dimensions against the filter's actual size of 15-1/2 x 15-1/2 x 1-3/4 inches before installation. Verify airflow arrow on the filter frame is oriented toward the blower, not toward the return air duct.