Pro-source MHT-370-LHD-AB-PRO Mountable Cable Tie 15in

Product Description

The PRO-SOURCE MHT-370-LHD-AB-PRO is a mountable nylon cable tie designed for securing and organizing wire bundles in electrical, HVAC, and general trade applications. At 15 inches in overall length with a 0.3 inch width, this tie delivers a rated tensile strength of 120 lb, making it suitable for medium-to-heavy bundle management. The integrated mounting hole allows the tie to be anchored directly to a panel, chassis, or surface, keeping bundled cables in a fixed position. It meets MIL-SPEC M20693B and carries UL Certification, which satisfies inspection requirements on commercial and industrial job sites. Electricians, HVAC installers, and panel technicians are the primary installers.

This cable tie is suited for residential and commercial electrical panels, HVAC control wiring, conduit runs, and equipment enclosures where bundles must be both cinched and anchored in place. The mountable design is particularly useful in tight equipment cabinets where bundle drift or vibration is a concern. The black nylon construction resists UV exposure, making it appropriate for outdoor or rooftop installations where ties may see sunlight. It accommodates a maximum bundle diameter of 104 mm, covering a wide range of wire harness sizes commonly encountered in trade work.

Key Features

• Mountable design with integrated mounting hole for surface anchoring
• 120 lb tensile strength rated for medium-to-heavy bundle loads
• 15 inch overall length accommodates bundles up to 104 mm in diameter
• Black nylon construction with UV resistance for indoor and outdoor use
• Meets MIL-SPEC M20693B and is UL Certified for code-compliant installations
• 0.3 inch width provides secure cinching across a range of wire harness sizes

Compatibility

Designed as a general-purpose mountable cable tie for use in electrical, HVAC, plumbing control wiring, and light industrial applications where a 15 inch, 120 lb rated tie with a mounting hole is required.

Installation Notes

Installation is performed by electricians, HVAC technicians, or panel installers using standard cable tie installation tools or by hand. De-energize all circuits before working inside panels or enclosures, following NEC lockout/tagout requirements. Insert the tie tail through the head until the ratchet engages and cinch to the desired tension without over-stressing the bundle. Secure the mounting hole to the surface using a fastener appropriate for the substrate before or after bundling, depending on access.