Pro-source HX2AMB-NCW Air Actuated Motor 0.93 Hp

Product Description

The PRO-SOURCE HX2AMB-NCW is a vane-type air actuated motor designed for pneumatic drive applications in industrial and trade settings. Rated at 0.93 horsepower with a maximum speed of 3000 RPM and a minimum operating speed of 350 RPM, this motor delivers consistent rotational output powered entirely by compressed air. It operates at a maximum working pressure of 100 psi and produces 1.5875 ft/lb (19.50 in/lb) of torque. The 1/2-inch flat-keyed shaft rotates clockwise in a single direction. Pneumatic technicians and maintenance mechanics install this motor where electric power is unavailable, hazardous, or impractical.

This motor is suited for light industrial equipment, pneumatic tooling rigs, conveyor drives, and specialty automation where compressed air supply is already present. The hub mount style and 1/4-inch NPT thread inlet simplify integration into standard pneumatic circuits. With a maximum air flow of 30 CFM, the motor is compatible with typical shop compressor systems running adequate line pressure. It is appropriate for both fixed installations and portable pneumatic assemblies requiring a compact, reliable rotary power source.

Key Features

• 0.93 HP output with a 3000 RPM maximum speed and 350 RPM minimum speed for a broad usable power band
• Maximum working pressure of 100 psi with 1/4-inch NPT inlet for standard pneumatic plumbing
• 1.5875 ft/lb torque output (19.50 in/lb) suits light-to-medium drive loads
• 1/2-inch flat-type output shaft at 1.14 inches in length for direct coupling or pulley attachment
• 4-vane design in a compact 3.94-inch diameter by 5.28-inch overall length envelope
• Hub mount style simplifies bracket or chassis integration

Compatibility

Designed as a replacement or new-installation air actuated vane motor for pneumatic drive systems requiring a hub-mount, 1/4-inch NPT, clockwise-rotation motor with a 1/2-inch flat shaft output.

Installation Notes

Installation should be performed by a qualified pneumatic or mechanical technician. Depressurize and lock out the air supply line completely before mounting or servicing this motor. Verify that the supply line can deliver adequate CFM at the rated working pressure before operation. Ensure all NPT thread connections are properly sealed with compatible thread sealant to prevent air leaks and pressure loss.