Pro-source 90380501709 Pvc Pipe Bushing Sch 80 2x1.5 in

Product Description

The PRO-SOURCE 90380501709 is a Schedule 80 PVC pipe bushing designed to reduce a 2-inch pipe connection down to a 1-1/2-inch fitting. It features a spigot inlet and a slip outlet, allowing it to seat directly into a standard socket-end fitting on one side while accepting a slip-fit connection on the other. At 0.38 pounds, this bushing is a lightweight, corrosion-resistant fitting suited for pressure piping systems in plumbing, irrigation, and industrial fluid-handling applications. Plumbers and pipefitters install this type of reducer bushing when a pipe run changes nominal size without requiring a union or coupling change.

This bushing is used in Schedule 80 PVC piping systems where a 2-inch-to-1-1/2-inch reduction is needed at a branch, transition, or equipment connection point. Common applications include commercial and residential plumbing, chemical distribution lines, pool and spa plumbing, and irrigation manifolds where PVC Schedule 80 pressure ratings are required. The spigot-by-slip end configuration makes it compatible with standard socket-weld PVC fittings and valves used throughout these systems.

Key Features

• Schedule 80 PVC construction for higher pressure ratings compared to Schedule 40
• Spigot x Slip end connections for direct integration into standard socket-end fittings
• 2-inch inlet to 1-1/2-inch outlet — concentric reducer bushing configuration
• Corrosion-resistant PVC material suitable for water, chemicals, and irrigation fluids
• Lightweight at 0.38 pounds for easy handling and installation

Compatibility

Designed as an OEM-style replacement and standard fitting for Schedule 80 PVC piping systems using 2-inch to 1-1/2-inch spigot-by-slip reducer bushings in plumbing, pool, irrigation, and industrial fluid-handling installations.

Installation Notes

Installation should be performed by a licensed plumber or qualified pipefitter in accordance with applicable IPC or local plumbing code requirements. Depressurize and drain the line completely before cutting or removing any existing fittings. Use PVC primer and Schedule 80-rated solvent cement for all slip connections; allow full cure time before pressurizing the system. Do not use petroleum-based lubricants or thread sealants on solvent-weld connections.