Pro-source 90340100509 Cpvc 90 Elbow 2in Sch 80 Slip

Product Description

The PRO-SOURCE 90340100509 is a 2-inch Schedule 80 CPVC 90-degree elbow designed for directional changes in pressurized piping systems. Manufactured from chlorinated polyvinyl chloride, this fitting handles the elevated temperatures and pressures common in industrial, chemical, and hot-water plumbing applications where standard PVC falls short. The slip-by-slip end connections accept solvent-welded pipe on both ends for a secure, leak-resistant joint. At 1.47 pounds, the fitting is solid and dimensionally consistent with Schedule 80 wall thickness requirements. This elbow is installed by licensed plumbers and pipefitters working on above-ground or in-plant piping runs.

This fitting is suited for residential and commercial plumbing, industrial process piping, and chemical distribution systems where CPVC material compatibility is required. Schedule 80 wall thickness provides greater pressure ratings and impact resistance compared to Schedule 40 fittings of the same nominal size. Typical applications include hot and cold water distribution, chemical transfer lines, and mechanical room piping where higher system pressures are present.

Key Features

• 2-inch nominal size with Schedule 80 wall thickness for elevated pressure service
• CPVC construction offers superior heat and chemical resistance compared to standard PVC
• Slip x Slip end connections for solvent-cement installation on both ends
• 90-degree turn geometry for right-angle directional changes in pipe runs
• UNSPSC Code 40175300 for standardized procurement and catalog reference

Compatibility

Designed as an OEM-style replacement or new-installation fitting compatible with 2-inch Schedule 80 CPVC piping systems using solvent-weld slip connections.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable plumbing codes such as the IPC or local authority requirements. Depressurize and drain the piping system fully before cutting into any existing line. Use a CPVC-rated solvent cement and primer appropriate for Schedule 80 fittings, and allow full cure time before restoring system pressure. Do not use PVC-only solvent cement on CPVC fittings, as it will not achieve an adequate bond.