Pro-source 5587501045PRO Air Chipping Hammer 1700 Bpm

Product Description

The PRO-SOURCE 5587501045PRO is a pneumatic air chipping hammer built for heavy-duty material removal in industrial and construction environments. It delivers 1,700 blows per minute with a 3-inch stroke length, making it effective for chipping concrete, removing rust and scale, breaking welds, and cleaning castings. The tool requires a 3/8-inch NPT air inlet and consumes 8.0 SCFM at operating pressure. At 16 pounds, it provides the mass needed for sustained impact work without operator fatigue from excessive vibration. Installation and operation require a properly sized air compressor and compatible air line fittings. This hammer is typically used by pipefitters, ironworkers, maintenance mechanics, and industrial tradespeople in fabrication shops and job sites.

The PRO-SOURCE 5587501045PRO is suited for general industrial applications including concrete demolition, surface preparation, weld slag removal, and foundry cleaning work. It connects to a standard compressed air supply via the 3/8-inch NPT inlet and is sized for both shop and field use. The tool is appropriate for single-operator use in scenarios where consistent high-cycle impact is required over extended work periods. Its air-powered design eliminates the need for electrical power at the work location, making it practical for remote or outdoor job sites.

Key Features

• 1,700 blows per minute for high-cycle impact performance on hard materials
• 3-inch stroke length provides deep, effective material penetration per blow
• 3/8-inch NPT air inlet compatible with standard shop air line fittings
• 8.0 SCFM air consumption supports sizing to a standard industrial compressor
• Pneumatic operation eliminates electrical hazards at the point of work
• 16-pound tool weight supports sustained impact without mounting hardware

Compatibility

Designed as a standard pneumatic chipping hammer for use with compressed air systems supplying a 3/8-inch NPT connection. Compatible chisel and moil point accessories should be selected based on shank size specified by the operator for the intended application.

Installation Notes

This tool is installed and operated by qualified industrial mechanics, ironworkers, or pipefitters familiar with pneumatic hand tools. Before connecting or disconnecting the air supply, depressurize the line and ensure the tool trigger is in the safe position. Use thread sealant on NPT fittings per standard shop practice and verify the air supply delivers adequate volume at the required operating pressure. Always wear appropriate PPE including eye protection, hearing protection, and vibration-dampening gloves when operating pneumatic impact tools.