Pro-source 5540003469PRO 3/8 in Air Impact Wrench 50 Ft/lb

Product Description

The PRO-SOURCE 5540003469PRO is a 3/8 inch drive inline air impact wrench built for trade and shop applications where a compact, high-speed impact tool is needed. Operating at 10,000 RPM with a torque range of 5 to 50 ft/lb (7 to 68 N/m), it delivers controlled fastening and removal force suited to a wide range of bolts and fasteners. The tool runs on a 1/4 inch NPT inlet, requires 3 CFM of air flow, and operates at 90 psi. At 2.2 pounds, it is light enough for extended use in tight spaces. HVAC technicians, mechanics, and general trade professionals regularly use tools in this class for equipment assembly, panel work, and service calls.

This inline impact wrench is suited to light-duty and medium-duty fastening tasks in automotive, HVAC, and general mechanical service environments. The 3/8 inch drive accepts standard sockets for common fastener sizes encountered in equipment service and installation work. Its inline handle configuration keeps the tool compact and manageable when working in confined areas such as equipment cabinets, under-dash locations, or mechanical rooms. A standard shop compressor capable of delivering 90 psi and at least 3 CFM at the tool is sufficient to run it.

Key Features

• 3/8 inch drive with torque range of 5 to 50 ft/lb (7 to 68 N/m) for controlled fastening
• 10,000 RPM free speed and 1,000 impacts per minute for fast, efficient operation
• Inline handle design for use in confined spaces and equipment enclosures
• 1/4 inch NPT air inlet compatible with standard shop air fittings
• Low 3 CFM air consumption suitable for smaller compressor setups
• Lightweight at 2.2 pounds, reducing fatigue during extended service work

Compatibility

Designed for use with standard 3/8 inch drive sockets and accessories on any shop air system delivering 90 psi and a minimum of 3 CFM at the tool inlet.

Installation Notes

Connect to a compressed air supply using a 1/4 inch NPT fitting and verify the line delivers at least 90 psi and 3 CFM before use. Always depressurize the air line before attaching or removing the tool. Use a properly rated socket for the fastener being driven and do not exceed the rated torque output. Installation and service work involving this tool should follow applicable shop safety practices and any relevant site-specific procedures.