Pro-source 5150003711JP Air Hose 3/8 in Id 300 Psi Pvc Ctl

Product Description

The PRO-SOURCE 5150003711JP is a multipurpose PVC air hose sold by the foot from a bulk coil, designed for compressed air distribution in shop, industrial, and trade environments. It measures 3/8 inch inside diameter and 19/32 inch outside diameter, with a working pressure rating of 300 psi. The temperature range spans 23 degrees F to 150 degrees F, making it suitable for year-round use in both indoor and outdoor service conditions. This hose ships in cut-to-length increments of 1 foot, with a 25-foot minimum cut, from a 500-foot total coil. It is a field-cut, no-end-connection hose requiring fittings to be field-installed by the technician.

This hose is appropriate for general-purpose pneumatic tool supply lines, compressed air distribution runs, and shop air plumbing where flexible routing is needed. The 3/8 inch bore suits air tools and equipment that operate within the 300 psi working pressure envelope. The yellow PVC jacket provides visual identification in busy shop environments and resists typical workshop abrasion. Plumbers, HVAC technicians, and general maintenance contractors commonly use bulk air hose of this type when building custom-length shop air systems or service vehicle setups.

Key Features

• 3/8 inch inside diameter supports standard pneumatic tool fittings and airflow requirements
• 300 psi working pressure rating for compressed air service
• PVC construction offers flexibility and resistance to common shop chemicals
• Yellow jacket for easy visual identification in shop environments
• Sold in 1-foot increments from bulk coil, allowing custom run lengths with 25-foot minimum cut
• Operating range of 23 degrees F to 150 degrees F supports cold-weather and warm indoor use

Compatibility

Designed as a cut-to-length bulk air hose for general multipurpose compressed air applications. No end connections are included; field-installed fittings appropriate for 3/8 inch ID PVC hose are required.

Installation Notes

Installation of compressed air hose and fittings should be performed by a qualified technician familiar with pneumatic system requirements. Depressurize the air system completely before cutting, fitting, or splicing any section of hose. Use fittings and clamps rated for the working pressure of the hose and inspect all connections for leaks after pressurization. Do not exceed the rated working pressure or temperature limits of the hose.