Pro-source 5010003713JP Air Hose 300 Psi 3/8 in Id 100 Ft

Product Description

The PRO-SOURCE 5010003713JP is a multipurpose PVC air hose built for general-purpose compressed air service in shop, field, and light industrial environments. It measures 3/8 inches inside diameter and 19/32 inches outside diameter, running 100 feet in length with a rated working pressure of 300 psi. The orange PVC construction keeps the hose flexible across a temperature range of 23 degrees F to 150 degrees F, making it suitable for year-round use in most North American climates. Both ends are terminated with 1/4-inch MNPT fittings, allowing direct connection to standard air tool quick-connect bodies or manifold ports. Plumbers, HVAC technicians, general contractors, and shop mechanics reach for this hose when they need a dependable, ready-to-use air delivery line without custom assembly.

This hose is suited for residential and light commercial applications where a long-run supply line is needed between a stationary compressor and a work area. The 100-foot length covers most single-bay shop setups or multi-room service scenarios without requiring an extension. The MNPT x MNPT end configuration works with the vast majority of standard pneumatic fittings stocked at supply houses. Its operating temperature floor of 23 degrees F means it holds up in unheated garages or cold-weather outdoor work without becoming brittle under normal conditions.

Key Features

• 300 psi working pressure rated for demanding compressed air service
• 3/8-inch ID bore supports adequate airflow for most pneumatic hand tools
• 100-foot length reduces the need for extension hoses in large work areas
• Orange PVC construction offers visibility on the job site and resists kinking under moderate use
• 1/4-inch MNPT x MNPT fittings on both ends connect directly to standard pneumatic hardware
• Temperature range of 23 degrees F to 150 degrees F covers most shop and field conditions

Compatibility

Designed as a general-purpose replacement or new-installation air hose compatible with standard 1/4-inch MNPT pneumatic fittings and compressed air systems operating within the 300 psi working pressure rating.

Installation Notes

Depressurize the air supply line fully before connecting or disconnecting this hose. Use thread sealant tape on MNPT connections and tighten to snug by hand before applying a wrench to avoid cross-threading PVC-compatible fittings. Avoid routing the hose over sharp edges or through areas where vehicle or foot traffic could create abrasion. Keep the hose stored loosely coiled when not in use to extend service life and prevent set kinking.