Pro-safe PSG1902BC Drench Shower Eyewash Station

Product Description

The PRO-SAFE PSG1902BC is a combination drench shower and eyewash station designed for emergency decontamination in industrial and commercial facilities. It delivers 20 GPM shower flow and 0.4 GPM bowl flow, both rated at 30 psi operating pressure. The unit features a 1-1/4 inch inlet, a plastic shower head, and galvanized steel pipe construction for corrosion resistance. Activation is handled by a triangular pull rod with push flag mechanism, allowing fast one-motion operation in an emergency. The eyewash bowl includes a hinged dust cover to keep the bowl clean between uses. Top or mid supply connections are supported, giving installers flexibility in rough-in configuration.

This station is intended for industrial plants, laboratories, chemical handling areas, and other workplaces where ANSI Z358.1 emergency eyewash and shower compliance is required. It is suited for both new construction and retrofit installations where a combined drench shower and eyewash unit is needed at a single location. Licensed plumbers and safety equipment contractors typically handle installation and commissioning. The bowl-style eyewash with cover is appropriate for environments where airborne contamination between uses is a concern.

Key Features

• Combination drench shower and eyewash bowl in a single station
• 20 GPM shower flow rate at 30 psi
• 0.4 GPM bowl flow rate at 30 psi
• Triangular pull rod with push flag activation for rapid single-motion use
• Hinged dust cover on eyewash bowl protects against contamination between activations
• Galvanized steel pipe construction for corrosion resistance
• Supports top or mid supply connection for installation flexibility

Compatibility

Designed as an OEM-style drench shower and eyewash combination station for emergency safety applications requiring ANSI Z358.1-compliant equipment with a 1-1/4 inch supply inlet.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and ANSI Z358.1 requirements. Shut off the water supply and relieve line pressure before making any connections. Verify supply line size and pressure are within the specified operating range before commissioning. After installation, flush the unit per ANSI Z358.1 activation and testing procedures before placing it in service.