Pro-safe PS-WBLM11B Self-retracting Lifeline 350 Lb 11 Ft

Product Description

The PRO-SAFE PS-WBLM11B is an 11-foot self-retracting lifeline (SRL) rated for a 350-pound capacity, designed for fall protection in construction, maintenance, and industrial worksites. The lifeline is constructed from UHMWPE (ultra-high-molecular-weight polyethylene), a high-strength, abrasion-resistant material that stays lightweight on the job. The anchorage end uses a self-locking carabiner made from alloy steel with zinc plating for corrosion resistance. The harness connection end is a steel locking snap hook. This unit meets OSHA requirements and carries ANSI Z359.14-2014 Class A and ANSI A10.32-2012 compliance ratings. It is installed by qualified safety professionals, rigging crews, and contractors working at height.

The PS-WBLM11B is suited for residential and commercial construction, tower work, roofing, and general industrial applications where a compact, retractable fall arrest device is required. The 11-foot retractable length keeps slack minimal, reducing free-fall distance compared to standard lanyards. The black UHMWPE lifeline resists wear in rough environments. This SRL connects to a full-body harness at the dorsal D-ring and anchors to a certified overhead anchorage point. It is appropriate wherever OSHA fall protection standards apply at heights of 6 feet or more in general industry and construction.

Key Features

• 350-pound rated capacity meets OSHA and ANSI fall arrest requirements
• 11-foot UHMWPE lifeline — lightweight, high-strength, and abrasion-resistant
• Alloy steel zinc-plated self-locking carabiner at the anchorage connection
• Steel locking snap hook at the harness connection end
• ANSI Z359.14-2014 Class A and ANSI A10.32-2012 compliant
• Automatic retraction keeps lifeline taut and minimizes trip hazard

Compatibility

Designed as an OSHA-compliant fall arrest component for use with full-body harnesses featuring a dorsal D-ring connection. Compatible with certified overhead anchorage systems meeting ANSI Z359.14-2014 Class A requirements.

Installation Notes

Installation and inspection must be performed by a competent person as defined by OSHA 29 CFR 1926.32. Before use, confirm the anchorage point is rated for fall arrest loads and that the overhead clearance is sufficient for the SRL travel distance plus any deceleration distance. Inspect the lifeline, connectors, and locking mechanisms before each use and remove from service if any wear, corrosion, deformation, or prior fall arrest event is detected. Never connect two locking connectors directly to each other without a compatible connector or anchor.