Pro-safe PS-HQC-22 Fall Protection Harness 350 Lb 2XL

Product Description

The PRO-SAFE PS-HQC-22 is a full body fall protection harness rated for a 350-pound load capacity, designed for workers operating at height on construction sites, industrial facilities, and commercial rooftops. Built from polyester webbing, the harness uses a padded quick-connect design that speeds up donning and doffing while reducing fatigue during extended wear. The back D-ring serves as the primary fall arrest attachment point. An anti-tangle strap keeps webbing organized and reduces snag risk in congested work environments. At 3.5 pounds, the harness balances durability with wearability across a full shift.

This harness is sized for 2X-Large users and is suited for general industry, construction, and utility applications where OSHA fall protection requirements apply. The combination of quick-connect leg and chest straps with friction-type shoulder straps allows for fast fitting adjustments in the field. It is appropriate for use with compatible lanyards, self-retracting lifelines, and anchor connectors in a complete fall arrest system. Licensed safety professionals and competent persons responsible for fall protection programs are the primary installers and fit inspectors for this equipment.

Key Features

• 350-pound load capacity for fall arrest applications
• Quick-connect leg and chest strap buckles for fast, secure closure
• Friction shoulder strap buckles allow tool-free length adjustment
• Back D-ring attachment point for primary fall arrest connection
• Anti-tangle strap keeps webbing routed and snag-free
• Padded design reduces pressure points during extended wear
• Polyester webbing construction for durability in field conditions

Compatibility

Designed for use as a component in a complete personal fall arrest system. Must be paired with a compatible lanyard, self-retracting lifeline, or other connecting subsystem and an appropriate anchor point rated for fall arrest loads.

Installation Notes

Fitting and inspection must be performed by a competent person as defined under applicable OSHA fall protection standards (29 CFR 1926.502 for construction, 29 CFR 1910.140 for general industry). Inspect all webbing, buckles, and the D-ring for damage, fraying, or deformation before each use. A harness that has arrested a fall must be removed from service immediately and inspected or replaced per the manufacturer's program. Do not modify webbing, buckles, or attachment hardware.