Pro-safe PS-HCLB-Q4 Full Body Harness 350 Lb Universal

Product Description

The PRO-SAFE PS-HCLB-Q4 is a full body fall protection harness rated for a 350-pound load capacity. Built in a construction style, it is made from polyester webbing and sized to fit a universal range of workers. The harness includes a back D-ring, a front D-ring, and side D-rings, giving installers and supervisors multiple anchor attachment points depending on the task. Quick-connect buckles are used on both the chest strap and leg straps for fast donning and doffing, while friction-style shoulder strap adjusters allow for a secure, fine-tuned fit. An anti-tangle strap keeps the webbing organized during use. This harness is installed by workers in construction trades operating at height.

The PS-HCLB-Q4 is suited for construction worksites where OSHA fall protection requirements apply at elevations of 6 feet or more. Typical applications include structural steel work, roofing, concrete forming, and general construction tasks where a personal fall arrest system is required. The multiple D-ring configuration supports use with a variety of lanyards, self-retracting lifelines, and positioning devices depending on the specific fall hazard.

Key Features

• 350-pound load capacity for full body fall arrest
• Back, front, and side D-rings for versatile anchor point selection
• Quick-connect chest and leg strap buckles for efficient donning and doffing
• Friction shoulder strap adjusters for a custom fit across a universal size range
• Anti-tangle strap keeps webbing routed and organized
• Polyester webbing construction for durability in field conditions

Compatibility

Designed as a universal-fit construction-style full body harness for use with standard OSHA-compliant personal fall arrest systems including compatible lanyards and self-retracting lifelines with appropriate connectors.

Installation Notes

A qualified person or competent person as defined under OSHA 29 CFR 1926 Subpart M should inspect the harness before each use and confirm proper fit. Inspect all webbing, buckles, and D-rings for damage, wear, or deformation before donning. The harness must be connected to an adequate anchorage point rated for fall arrest loads in accordance with applicable OSHA and ANSI Z359 standards. Remove the harness from service immediately after a fall event and do not return it to use without a thorough inspection by a qualified person.