Pro-safe PS-HCLB-Q3 Tower Climber Harness 350 Lb 2XL

Product Description

The PRO-SAFE PS-HCLB-Q3 is a full body fall protection harness designed for tower climbers and other elevated work applications. Built from polyester webbing, this harness carries a 350-pound load capacity and fits workers in size 2X-Large. It features a back D-ring, front D-ring, and side D-rings for versatile attachment point options depending on the work position. The leg straps use quick-connect buckles for fast donning and doffing, the chest strap also uses a quick-connect buckle, and the shoulder straps use friction buckles for a secure fit. An anti-tangle strap keeps webbing organized during use. This harness weighs 6.75 pounds and is intended for installation by competent persons as defined under applicable fall protection standards.

This harness is sized for 2X-Large users and is suited for telecommunications tower climbing, antenna and utility structure work, and other fall arrest applications where multiple D-ring attachment points are required. The combination of front, back, and side D-rings makes it adaptable for positioning, restraint, and arrest systems. It packages as a single unit and is a direct addition to a compliant personal fall arrest system when paired with a compatible lanyard or self-retracting lifeline.

Key Features

• 350-pound load capacity rated full body harness
• Tower climber style with back, front, and side D-rings for multi-position attachment
• Quick-connect leg and chest strap buckles for fast donning and doffing
• Friction shoulder strap buckles for adjustable, secure shoulder fit
• Anti-tangle strap keeps webbing routed and organized
• Polyester webbing construction for durability in field conditions
• Size 2X-Large fit range

Compatibility

Designed as an OEM-style full body harness for use in personal fall arrest, positioning, and restraint systems requiring ANSI-compliant tower climber style harnesses with multiple D-ring attachment points.

Installation Notes

Fall protection harnesses must be inspected by a competent person before each use and retired from service following any fall event or visible webbing damage. Donning, fitting, and connecting to an anchorage system must follow the manufacturer instructions and applicable OSHA 1926 Subpart M requirements. All connecting hardware such as lanyards and anchorage connectors must be verified compatible with the harness D-ring gate strength ratings before use. Do not alter, field-modify, or repair any harness component.