Pro-safe PS-CBLM10B Self-retracting Lifeline 310 Lb 10 Ft

Product Description

The PRO-SAFE PS-CBLM10B is a self-retracting lifeline (SRL) designed for fall protection in industrial, construction, and maintenance environments. The unit features a 10-foot galvanized steel cable with a 3/16-inch diameter that automatically retracts and locks during a fall event, limiting fall distance and reducing arrest forces on the worker. The lanyard terminates in a zinc plated steel locking snap hook, while the unit connector is a zinc plated steel self-locking carabiner. Rated for a working capacity of 310 pounds, this SRL meets ANSI Z359.14-2014 Class A and A10-32-2012 standards, as well as OSHA requirements. Installation and inspection are performed by qualified safety-trained personnel.

This self-retracting lifeline is suited for residential and commercial construction, roofing, structural steel, telecommunications tower work, and general industrial maintenance where overhead or elevated anchor points are available. It is intended for use as a personal fall arrest system component, connecting between a certified anchorage and a full-body harness dorsal D-ring. The 10-foot cable length is appropriate for work positioning situations where limited fall clearance is available and a compact SRL profile is required.

Key Features

• 10-foot galvanized steel cable with 3/16-inch diameter for corrosion resistance in outdoor and wet environments
• 310 lb rated capacity to accommodate a range of workers with tools and gear
• Zinc plated steel locking snap hook on the lifeline end for secure harness attachment
• Zinc plated steel self-locking carabiner on the unit connector for anchorage attachment
• Compliant with ANSI Z359.14-2014 Class A, A10-32-2012, and OSHA fall protection regulations
• Automatic retraction keeps slack out of the lifeline, reducing trip hazard and fall distance

Compatibility

Designed as an OEM-style replacement or new-installation self-retracting lifeline compatible with standard full-body harness dorsal D-ring connections and certified overhead anchorage systems meeting applicable ANSI and OSHA anchor strength requirements.

Installation Notes

Installation and inspection must be performed by a qualified person familiar with OSHA 29 CFR 1926 Subpart M fall protection requirements and ANSI Z359 standards. Before connecting, verify the anchorage point is rated for fall arrest loads and is positioned to minimize free-fall distance and swing fall hazard. Inspect the cable, carabiner, and snap hook for damage, corrosion, or deformation before each use — remove from service immediately if any defect is found. Do not connect the SRL to a body belt or non-fall-arrest harness.