Pro-safe PS-2DANCR4 D-ring Anchor Sling 48 Inches

Product Description

The PRO-SAFE PS-2DANCR4 is a polyester D-ring anchor sling designed for temporary fall protection applications. At 48 inches in length and 3 inches in width, this sling provides a reliable overhead anchor point connection for personal fall arrest systems. The polyester webbing construction offers resistance to common environmental exposure while maintaining the flexibility needed for quick rigging. Weighing 1.75 pounds, it is light enough for a tech to carry as standard kit. Licensed safety professionals and contractors install this sling as a temporary tie-off point on structural members, beams, or columns where a fixed anchor is not present.

This anchor sling is suited for temporary fall protection setups on residential and commercial job sites. It is intended for use where workers must establish an overhead anchor point before beginning work at height. Typical install scenarios include steel erection, roofing, HVAC equipment installation at elevation, electrical work near open edges, and similar trades requiring OSHA-compliant tie-off. The D-ring end allows direct connection to a harness lanyard, self-retracting lifeline, or other ANSI-compliant fall arrest hardware.

Key Features

• 48-inch length provides reach to clear structural obstructions when looping around beams or columns
• Polyester webbing construction resists abrasion and common chemical exposure
• D-ring connection type allows direct attachment to standard fall arrest hardware
• Rated for temporary use, supporting compliant short-duration tie-off setups
• Lightweight at 1.75 pounds for easy carry and field deployment
• 0.38-inch profile keeps the sling compact when stored or staged on a tool belt

Compatibility

Designed as an OEM-style temporary anchor sling compatible with standard D-ring fall arrest lanyards, self-retracting lifelines, and personal fall arrest system hardware meeting ANSI Z359 and OSHA 29 CFR 1926.502 anchor requirements.

Installation Notes

Installation and inspection of fall protection anchor slings must be performed by a competent person as defined by OSHA standards. Before each use, inspect the webbing for cuts, fraying, chemical damage, and heat exposure that could reduce load capacity. The sling must be anchored to a structural member capable of supporting the required load per OSHA 29 CFR 1926.502 and applicable ANSI Z359 standards. Never use this sling as a permanent anchor solution or in configurations not covered by the manufacturer documentation.