Pro-safe CSKU23 Battery Acid Spill Kit 30 Gal Drum

Product Description

The PRO-SAFE CSKU23 is a battery acid spill containment and cleanup kit designed for facilities that store, charge, or service lead-acid batteries. The kit ships in a 30-gallon polypropylene drum that doubles as the primary containment vessel during cleanup operations. At 80 pounds, it is a fully stocked response unit intended to handle a significant acid release from the moment it is opened. Contents include sorbent pads, chemical sorbent socks, a sorbent roll, a neoprene drain cover, a disposable suit, epoxy repair putty, nitrile gloves, and safety goggles. Facilities managers, industrial hygienists, and safety coordinators are the primary purchasers, though HVAC and electrical service teams working around battery backup systems also keep these kits on site.

This kit is suited for battery rooms, UPS battery banks, forklift charging stations, and any service environment where sulfuric acid exposure is a credible hazard. The included neoprene drain cover is intended to block floor drains before a spill spreads. The chemical sorbent materials are rated for corrosive liquids, making them appropriate for battery acid rather than standard petroleum-based absorbents. The polypropylene drum resists chemical attack from acid contact, so it can hold contaminated materials for disposal without degrading. Two disposal bags are included for bagging spent sorbents before transport.

Key Features

• 30-gallon polypropylene drum provides chemical-resistant primary containment and storage
• Includes 25 sorbent pads sized 15 inches x 17 inches for surface acid absorption
• Three chemical sorbent socks at 3 inches x 48 inches for berm and containment perimeter control
• One chemical sorbent roll at 36 inches x 144 feet for large-area coverage
• 36-inch x 36-inch neoprene drain cover to prevent acid from entering floor drain systems
• Full PPE package included: disposable suit, nitrile gloves, and safety goggles for responder protection
• Epoxy stick repair putty for temporary patching of leaking battery cases or containers

Compatibility

Designed for battery acid spill response applications involving sulfuric acid from lead-acid battery systems.

Installation Notes

Deployment of this kit should be performed by personnel trained in hazardous materials first-response procedures. Don all included PPE before approaching the spill area. Regulations governing disposal of acid-saturated sorbent materials vary by jurisdiction and typically fall under EPA and DOT hazardous waste guidelines, so confirm local disposal requirements before bagging spent materials. Store the kit in a cool, dry location away from direct sunlight and inspect contents periodically to ensure PPE integrity is maintained.