Premise Wiring B2050 Flexible Liquidtight Conduit 1/2 in

Product Description

The PREMISE WIRING B2050 is a corrugated, extra-flexible liquidtight conduit designed to protect wiring runs in wet, damp, and chemically challenging environments. Constructed entirely of extruded PVC, it features a corrugated inner core bonded to a smooth PVC jacket, yielding a non-metallic assembly rated for 600 volts and a temperature range of 0 to 140 degrees F. The 1/2 inch trade size has an inner diameter of 0.63 inches and an outer diameter of 0.83 inches. Electricians install this conduit where flexible routing is required and where standard metallic liquidtight would be vulnerable to corrosion or chemical exposure. Each reel provides 100 feet of continuous conduit.

The B2050 is suited for residential and light commercial electrical installations in wet or damp locations per NEC 351B applicable standards. Its corrugated wall construction allows the conduit to handle twists, turns, bends, switchbacks, and straight runs without kinking or inducing metal fatigue concerns common to metallic flexible conduit. Typical applications include motor connections, HVAC equipment wiring, pump installations, outdoor junction routing, and any service entry point where moisture intrusion is a concern. The black PVC color provides UV resistance for exposed exterior routing.

Key Features

• Corrugated PVC core bonded to PVC jacket — fully non-metallic construction eliminates metal fatigue and separation
• Chemical-resistant PVC material suitable for harsh or corrosive environments
• IP66 enclosure rating — protected against powerful water jets and dust ingress
• 600-volt rating covers standard branch-circuit and feeder applications
• Temperature rated from 0 to 140 degrees F for use in cold and warm location installs
• UL and CSA listed — meets NEC 351B applicable standard for liquidtight non-metallic conduit

Compatibility

Designed as an OEM-style replacement or new-installation liquidtight non-metallic flexible conduit for 1/2 inch trade size fittings in wet and damp location wiring systems per NEC 351B. Compatible with standard 1/2 inch liquidtight non-metallic conduit fittings.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code and applicable local codes. De-energize all circuits and verify with a meter before making wiring connections. Use listed 1/2 inch liquidtight non-metallic fittings at terminations to maintain the IP66 rating and code-compliant liquidtight seal. Avoid sharp bends tighter than the 2-inch minimum bending radius to prevent wall deformation or conduit damage.