Premier Paint Roller 9MCR-1 Microfiber Roller Cover 9 in

Product Description

The PREMIER PAINT ROLLER 9MCR-1 is a general purpose microfiber roller cover designed for applying paints, stains, urethanes, and cements to smooth surfaces. The 5/16-inch nap depth is well suited for flat and low-texture walls where a thin, even film is required. At 9 inches wide, the cover fits standard 9-inch roller frames and delivers consistent coverage across broad surface areas. Microfiber construction holds paint efficiently and releases it evenly, reducing spattering during application. This cover is a practical choice for professional painters, contractors, and finishing tradespeople working on interior or exterior flat surfaces.

This roller cover is intended for use on smooth surfaces including drywall, plaster, and sealed concrete. The 5/16-inch nap is the correct specification for low-viscosity coatings such as enamels and urethanes as well as standard interior and exterior paints. It is commonly used in residential and light commercial repaint work where surface texture is minimal and finish quality is a priority. The microfiber fabric is compatible with water-based and solvent-based coatings alike, making it a versatile option across a range of finishing tasks.

Key Features

• Microfiber nap material for smooth, even paint release with minimal spattering
• 5/16-inch nap depth optimized for smooth surface application
• 9-inch wide cover fits standard 9-inch roller frames
• Compatible with paints, stains, urethanes, and cements
• Lightweight construction at 0.15 pounds for reduced fatigue during extended use

Compatibility

Designed as a general purpose replacement roller cover for standard 9-inch roller frames. Compatible with paints, stains, urethanes, and cements as noted in the product specifications.

Installation Notes

Install the cover onto a clean, dry 9-inch roller frame before use. Rinse the microfiber nap with the appropriate solvent for the coating being applied prior to first use to remove loose fibers. After use, clean the cover thoroughly or dispose of it if single-use conditions apply. Always follow coating manufacturer safety guidelines when working with solvent-based products, including adequate ventilation and appropriate PPE.