Precision Twist Drill 6001107 Taper Shank Drill Bit

Product Description

The PRECISION TWIST DRILL 6001107 is a taper shank drill bit engineered for general-purpose drilling in metal and industrial materials. It carries a 1.1811 inch (30.00 mm) cutting diameter with a Morse Taper 3 (3MT) shank, seating directly into compatible machine spindles without a separate chuck. The bit is manufactured from high speed steel with an oxide finish that provides basic corrosion and heat resistance. Overall length is 11.625 inches. The 118-degree standard point angle with web thinning reduces entry thrust and keeps the bit cutting efficiently. This bit is installed and used by machinists, maintenance mechanics, and metalworking shops running floor-standing drill presses and lathes with taper-spindle tooling.

This bit is suited for production and maintenance drilling in general-purpose ferrous and non-ferrous metals where a large-diameter hole is required without intermediate reaming. The right-hand spiral flute with regular helix evacuates chips cleanly through the 6.875-inch flute length. The Series 5ATS designation and DIN 345 standard compliance position this bit for shops sourcing to European or internationally referenced tooling specifications. It is a direct fit for any machine spindle or adapter accepting a 3MT taper shank.

Key Features

• 1.1811 inch (30.00 mm) cutting diameter for large-diameter through-hole and blind-hole applications
• Morse Taper 3 (3MT) shank seats directly in compatible drill press or lathe spindles
• High speed steel construction with oxide finish for general-purpose metal cutting
• 118-degree standard point with web thinning to reduce thrust on entry
• Right-hand spiral flute, 6.875 inches long, for effective chip evacuation
• Meets DIN 345 standard; Series 5ATS

Compatibility

Designed as an OEM-style replacement or direct-use taper shank drill bit for machine spindles and drill sleeves accepting a Morse Taper 3 (3MT) shank.

Installation Notes

Installation is performed by qualified machinists or maintenance personnel. Power down and lock out the machine before seating or removing the taper shank. Clean the spindle bore and shank taper of chips and oil before seating to ensure full contact and prevent slippage under load. Do not use a hammer to drive the shank; use the machine drawbar or a proper drift and drift slot to seat and eject the bit.