Precision Twist Drill 6001057 Taper Shank Drill Bit 2MT

Product Description

The PRECISION TWIST DRILL 6001057 is a taper shank drill bit designed for metal-cutting applications in machine shop and industrial environments. Built from high speed steel with an oxide finish, it carries a 19/32-inch (0.5938-inch) diameter and a 118-degree standard point angle. The 2MT Morse taper shank seats directly into compatible drill press spindles and lathes, providing a secure, self-holding connection during heavy-duty drilling. Web thinning reduces thrust and improves chip evacuation at the cutting face. This bit is suited for machinists, toolmakers, and maintenance technicians working with steel, cast iron, and similar materials.

The 6001057 is a general-purpose bit intended for right-hand cutting on stationary machine tools including drill presses, milling machines, and engine lathes equipped with a No. 2 Morse taper spindle. The spiral flute design promotes consistent chip removal throughout the cut. With an overall length of 8.75 inches and a flute length of 4.875 inches, it accommodates moderate-depth holes in workpieces where a straight-shank bit would lack the holding rigidity needed for the bore diameter.

Key Features

• 19/32-inch (0.5938-inch) cutting diameter in ANSI-standard sizing
• No. 2 Morse taper (2MT) shank for self-holding fit in compatible spindles
• 118-degree standard point angle with web-thinned tip for reduced thrust
• High speed steel construction for general-purpose metal cutting
• Oxide finish for surface protection and reduced friction during entry
• Right-hand spiral flute for efficient chip evacuation

Compatibility

Designed for use in drill presses, lathes, and milling machines fitted with a No. 2 Morse taper spindle socket. Conforms to ANSI standards per Series 209 specifications.

Installation Notes

Installation is performed by a machinist or qualified technician. Power down and lock out the machine before inserting or removing the taper shank. Clean both the shank and spindle socket of chips and oil before seating to ensure full taper contact. Use a drift key and drift slot to safely eject the bit from the spindle — never strike the spindle housing directly.