Precision Twist Drill 6000948 Taper Shank Drill Bit 2MT

Product Description

The PRECISION TWIST DRILL 6000948 is a taper shank drill bit engineered for high-performance metal drilling in industrial and shop environments. It carries a 17/32 inch (0.5313 inch decimal) diameter with a No. 2 Morse taper shank, allowing it to seat directly in taper-shank-compatible drill presses, lathes, and milling machines without a chuck. The 135-degree notched point reduces walking on entry and lowers thrust requirements compared to a standard 118-degree geometry. Constructed from high speed steel with a gold oxide finish, this bit handles ferrous metals, cast iron, and general-purpose drilling where carbide is not required. Machinists and tool room technicians are the primary installers.

This bit is suited for production drilling and maintenance machining operations in both job shop and manufacturing settings. The regular spiral flute and right-hand cutting direction make it a straightforward drop-in for standard spindle setups. With an overall length of 8.5 inches and a flute length of 4.625 inches, it provides adequate reach for deep-hole applications within the 2MT shank class. The web-thinned geometry reduces the chisel edge load, which is particularly useful when drilling harder ferrous stock on lower-horsepower machines.

Key Features

• 17/32 inch diameter with 0.5313 inch decimal equivalent for precise sizing
• No. 2 Morse taper shank seats directly in compatible spindles without a separate chuck
• 135-degree notched point with web thinning reduces entry walking and thrust load
• High speed steel construction with gold oxide finish for heat resistance and lubricity
• Regular right-hand spiral flute evacuates chips efficiently during through-hole drilling
• Meets ANSI standards for taper shank drill geometry and tolerances

Compatibility

Designed for use in any drill press, lathe tailstock, or milling machine spindle accepting a No. 2 Morse taper shank. Confirm the receiving spindle or sleeve is rated for 2MT before installation.

Installation Notes

Installation is performed by machinists or tool room technicians. Power down and lock out the machine spindle before seating or removing the taper shank. Clean both the shank and the spindle bore of chips and oil before insertion to ensure full taper contact and prevent fretting. A drift and drift slot should be used to remove the bit — never use a hard hammer strike directly on the shank.