Precision Brand 16570 Steel Shim Stock Roll 0.018 in 12 in Wide

Product Description

The PRECISION BRAND 16570 is a 1010 low carbon steel shim stock roll used to fill gaps, set clearances, and establish precise tolerances in mechanical assemblies. At 0.018 inches thick and 12 inches wide with a 120-inch length, this roll gives technicians enough material to cut custom shims for a wide range of industrial, HVAC, plumbing, and general mechanical applications. The low carbon steel construction provides consistent thickness, good machinability, and reliable compressive strength. Weighing 8.58 pounds, this roll is sized for bench work and field fabrication alike. Licensed tradespeople and maintenance professionals in industrial and commercial settings are the primary users of this product.

This shim stock roll is suited for applications where precise gap control or alignment is critical. Common uses include leveling equipment bases, aligning pump flanges, setting bearing clearances, and shimming HVAC equipment during installation or service. The 12-inch width allows for large shim blanks or multiple smaller pieces to be cut from a single strip. The 120-inch roll length supports high-volume jobs or repeated shim fabrication without the need for frequent restocking. It is appropriate for both commercial and light industrial environments.

Key Features

• 1010 low carbon steel provides consistent hardness and machinability for field cutting
• 0.018-inch thickness suitable for fine tolerance adjustment in mechanical assemblies
• 12-inch width supports large-format shim blanks cut to custom dimensions
• 120-inch roll length reduces material changeover on multi-shim jobs
• Roll format allows on-site cutting with standard metal shears or snips
• UNSPSC Code 31231400 for procurement and materials management systems

Compatibility

Designed as a general-purpose steel shim stock roll for use in mechanical alignment, gap setting, and tolerance adjustment across industrial, commercial, and trade applications where 1010 low carbon steel and 0.018-inch material thickness meet specification requirements.

Installation Notes

Shim stock cutting and installation is typically performed by millwrights, industrial mechanics, HVAC technicians, or plumbers during equipment alignment and base leveling work. Cut shims using aviation snips, metal shears, or a bench-top metal cutter rated for light-gauge steel. Deburr all cut edges before placing shims under load-bearing surfaces to prevent stress concentration. Always verify the final installed gap or clearance with a calibrated feeler gauge after shimming is complete.