Pps Megapress G 691514253015 Carbon Steel Press Tee 1/2 in

Product Description

The PPS 691514253015 is a MegaPress G carbon steel press tee fitting sized at 1/2 inch nominal, designed for gas and fuel distribution systems in commercial and residential plumbing installations. Using a press-style end connection on all three ports, this tee eliminates open-flame brazing and threading on the job, speeding up rough-in work significantly. The fitting is rated to 200 psi and carries a temperature range of -40 to 180 degrees F. An HNBR (Buna) seal is factory-installed, making it ready for natural gas and fuel oil service straight out of the package. Licensed plumbers and pipefitters are the typical installers for this type of fitting.

This tee is suited for systems carrying natural gas, LP gas, diesel fuel, compressed air, and vacuum. It is commonly installed in residential gas piping rough-ins, light commercial fuel distribution runs, and compressed air distribution headers where a code-compliant, press-style connection is required. The press-end configuration works with standard MegaPress G jaw tooling. Verify local AHJ approval for press fittings on gas service before installation.

Key Features

• Three-port press connection eliminates brazing and threading on natural gas and fuel lines
• Factory-installed HNBR (Buna) seal rated for natural gas and fuel oil service
• Rated to 200 psi working pressure
• Temperature range of -40 to 180 degrees F
• Carbon steel construction for durability in gas and fuel piping applications
• 1/2 inch nominal size fits standard half-inch pipe press tooling

Compatibility

Designed for use in natural gas, LP gas, diesel fuel, compressed air, and vacuum piping systems. Compatible with MegaPress G press tooling for press-style carbon steel fittings in 1/2 inch nominal pipe size.

Installation Notes

Installation must be performed by a licensed plumber or pipefitter in accordance with local gas codes and the International Fuel Gas Code (IFGC). Shut off gas supply and verify zero pressure at the line before fitting installation. Use only the appropriate MegaPress G jaw and press tool rated for this fitting size and material. Inspect the HNBR seal for damage or displacement before pressing, as a compromised seal will void the connection integrity.