Pps Megapress 691514253411 Press Tee 1x1x3/4 in Carbon Steel

Product Description

The PPS 691514253411 is a MegaPress G carbon steel press tee fitting designed for use in piped gas, fuel, and compressed air systems. This tee connects runs of 1-inch pipe to a 3/4-inch branch in a press-fit configuration, eliminating the need for threading, soldering, or open flame during assembly. The fitting uses an HNBR (Buna) elastomer seal rated for pressures up to 200 psi and a temperature range of -40 to 180 degrees F. It is intended for installation by licensed plumbing and gas-fitting professionals in commercial and light industrial applications.

This fitting is rated for natural gas, LP gas, diesel fuel, compressed air, and vacuum service. The press-style end connection allows fast, repeatable field assembly using a standard press tool, making it well suited for retrofit and new-construction piping runs where torch-free connections are required by code or jobsite conditions. The 1 x 1 x 3/4 inch nominal size covers a common reducing-branch configuration seen in gas distribution and compressed air distribution headers.

Key Features

• Press-fit end style for tool-pressed, torch-free installation
• HNBR (Buna) elastomer seal rated for gas and fuel oil service
• Pressure rating of 200 psi
• Temperature range of -40 to 180 degrees F
• Carbon steel construction for durability in gas and compressed air piping
• Approved for natural gas, LP gas, diesel fuel, compressed air, and vacuum applications

Compatibility

Rated for natural gas, LP gas, diesel fuel, compressed air, and vacuum service. Designed for use in press-fit carbon steel piping systems where a 1 x 1 x 3/4 inch tee configuration is required.

Installation Notes

Installation must be performed by a licensed plumber or gas fitter in accordance with applicable local codes and IFGC requirements. Depressurize and purge the line before working on any gas or fuel piping system. Use only a calibrated press tool with the appropriate jaw set for this fitting size and series. Do not apply heat to seat or adjust the fitting after pressing.