Pps Megapress 691514252360 45 Deg Press Elbow 3/4 in

Product Description

The PPS 691514252360 is a 3/4 inch, 45-degree press elbow fitting manufactured from carbon steel and designed for use in press-connect piping systems. This fitting carries an HNBR (Buna) seal and is rated for 200 psi service pressure across a temperature range of -40 to 180 degrees F. It is part of the MegaPress G product line by Viega, engineered for natural gas, LP gas, diesel fuel, compressed air, and vacuum service. Licensed plumbers and pipefitters install this fitting in commercial and residential mechanical systems where flame-free, press-tool connections are required.

This elbow is suited for 3/4 inch press-connect piping in natural gas distribution, LP gas, diesel fuel supply, compressed air, and vacuum applications. The press-end style eliminates the need for threading, soldering, or open flame during installation, making it appropriate for retrofit and new-construction work in occupied or sensitive environments. Its carbon steel construction and HNBR seal make it compatible with fuel oil and gas service within its rated temperature and pressure envelope.

Key Features

• 45-degree elbow geometry for directional changes in press-connect piping runs
• Rated 200 psi service pressure with HNBR (Buna) seal
• Temperature range: -40 to 180 degrees F
• Carbon steel construction for fuel gas and fuel oil service compatibility
• Press end style — no threading, soldering, or open flame required
• Approved for natural gas, LP gas, diesel fuel, compressed air, and vacuum applications

Compatibility

Designed for use in 3/4 inch press-connect piping systems handling natural gas, LP gas, diesel fuel, compressed air, and vacuum service. Compatible with MegaPress G press tooling as specified by Viega for carbon steel press fittings.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable local mechanical and fuel gas codes, including IFGC requirements where natural gas or LP gas service is involved. Shut off and depressurize the supply line completely before making or modifying any connections. Use only the correct press jaw and ring specified for MegaPress G carbon steel fittings — improper tooling will result in an incomplete or failed connection. Inspect the HNBR seal for damage before pressing and verify full insertion depth prior to actuation.