Pps 691514781174 Copper Press Reducing Coupling 2x1-1/4 in

Product Description

The PPS 691514781174 is a copper press reducing coupling designed for professional plumbing and mechanical systems. Manufactured under the ProPress line by Viega, this fitting connects a 2-inch pipe to a 1-1/4-inch pipe using a fitting x press end style, eliminating the need for open flame during installation. It carries a pressure rating of 200 psi and a temperature range of 0 to 250 degrees F, making it suitable for both hot and cold water applications. The overall length is 3.82 inches. Licensed plumbers and mechanical contractors are the primary installers of this fitting type.

This reducing coupling is rated for use across a wide range of systems including potable water, hot and cold water distribution, hydronic heating, gas systems, fire protection, and solar thermal systems. The press connection method makes it well suited for retrofit and new construction work in residential and light commercial settings where torch-free joining is preferred or required by code or building conditions.

Key Features

• Press connection end style eliminates open-flame soldering for faster, safer installation
• Rated to 200 psi for demanding pressurized system service
• Temperature range of 0 to 250 degrees F covers heating and potable water applications
• Copper construction provides corrosion resistance and long-term durability
• Reducing coupling profile transitions 2-inch to 1-1/4-inch nominal pipe in a single fitting
• Approved for use in potable water, heating, gas, fire protection, and solar systems

Compatibility

Rated for potable water systems, hot and cold water systems, heating systems, gas systems, fire protection systems, and solar systems. Designed as an OEM-style press fitting replacement or new-installation component for 2-inch to 1-1/4-inch nominal copper pipe runs.

Installation Notes

Installation must be performed by a licensed plumber or qualified mechanical contractor in accordance with applicable local plumbing codes and IAPMO or IPC standards. Depressurize and drain the system fully before installing or replacing any press fitting. A manufacturer-approved press tool and correct jaw profile for the fitting size are required to achieve a proper seal. Do not use a torch or heat source on press-style copper fittings.