Powers 07582-pwr Plastic Plug Wall Anchor 1/4 in 100 Pk

Product Description

The POWERS 07582-pwr is a plastic plug wall anchor designed for use in masonry and other common mounting surfaces. The anchor measures 1-3/16 inches in overall length with a 1/4-inch diameter body and accepts screws from size 6 to size 12. When a screw is driven into the anchor, anti-rotation fins and an expanding body wedge the anchor firmly against the walls of the drilled hole. The plastic construction distributes holding force evenly across the hole surface. These anchors are corrosion-resistant and suitable for permanent installations. They are packaged in quantities of 100 and are installed by contractors, electricians, plumbers, HVAC technicians, and general tradespeople.

These plug anchors are used in residential and light commercial applications wherever fasteners must be secured to masonry or similar surfaces. Compatible mounting surfaces include block, brick, concrete, drywall, plaster, stone, and wood. A 1/4-inch drill bit is required to prepare the mounting hole. Minimum hole depth is 1-9/16 inches and minimum material thickness is 3/8 inch. Screws are not included with this package. The coarse thread design and anti-rotation fins help maintain anchor position during screw installation.

Key Features

• Plastic body conforms to the hole surface and distributes holding force evenly
• Anti-rotation fins prevent spinning during screw installation
• Compatible with screw sizes 6 through 12
• Works in block, brick, concrete, drywall, plaster, stone, and wood
• Corrosion-resistant plastic construction for lasting performance
• Packaged 100 anchors per pack for high-volume work

Compatibility

Compatible mounting surfaces include block, brick, concrete, drywall, plaster, stone, and wood. Accepts screw sizes 6 through 12. Requires a 1/4-inch diameter pilot hole.

Installation Notes

Install using a 1/4-inch drill bit to prepare the pilot hole to a minimum depth of 1-9/16 inches. Ensure minimum material thickness of 3/8 inch is present before installing. Drive the anchor flush with the surface before inserting the screw. These are permanent anchors and are not designed for removal or reuse after installation.

Technical Specifications

• Overall Length: 1-3/16 inches
• Anchor Diameter: 1/4 inch
• Anchor Size: 6 to 12 x 1-3/16 inches
• Compatible Screw Size: 6 to 12
• Drill Bit Size: 1/4 inch
• Minimum Hole Depth: 1-9/16 inches
• Minimum Material Thickness: 3/8 inch
• Material: Plastic
• Finish: Plain
• Color: White
• Thread Type: Coarse
• Series: Sharkie
• Compatible Materials: Block, Brick, Concrete, Drywall, Plaster, Stone, Wood
• Includes Screw: No
• Removable: Permanent
• Package Quantity: 100
• Country of Origin: China (subject to change)

Standard Information

• Brand: POWERS
• Manufacturer Part Number: 07582-pwr