Potter Electric Signal pdc-1012 Vibrating Bell 92db 10in 12VDC

Product Description

The POTTER ELECTRIC SIGNAL pdc-1012 is a vibrating-type bell designed for use as a fire alarm, burglar alarm, or general signaling device in indoor installations. Operating at 12 volts DC, the unit delivers a high-output 92 dB alert tone suitable for applications where audible notification is critical. Its low power consumption makes it well-suited for battery-backed or panel-powered alarm systems. The 10-inch bell face produces a broad, penetrating sound pattern. Licensed alarm and fire protection technicians are the typical installers for this class of signaling device.

The pdc-1012 is intended for indoor use in residential or light commercial fire alarm, intrusion detection, and general signaling systems. It mounts directly to a standard 4-inch square electrical box, making it compatible with common rough-in wiring infrastructure. This mounting approach simplifies installation in both new construction and retrofit projects where standard electrical boxes are already in place.

Key Features

• Vibrating bell mechanism produces a reliable, attention-getting audible signal
• 92 dB output rating for effective notification in noisy or large indoor spaces
• Operates at 12 volts DC with low power consumption
• 10-inch bell diameter for broad sound projection
• Mounts to standard 4-inch square electrical box for straightforward installation
• Suitable for fire alarm, burglar alarm, and general signaling applications

Compatibility

Designed for indoor signaling applications requiring a 12 VDC vibrating bell; compatible with alarm panels and control systems that supply a 12-volt DC notification circuit output.

Installation Notes

Installation should be performed by a licensed fire alarm or low-voltage electrician in accordance with NFPA 72 and applicable local codes. De-energize the alarm panel or notification circuit before wiring the device. Secure the unit to a 4-inch square electrical box using the provided mounting hardware, and verify polarity on the DC circuit before restoring power. Do not install in outdoor or wet locations.