Potter Electric 1000407-80 Fire Alarm Pull Station

Product Description

The POTTER ELECTRIC SIGNAL CO. US 1000407-80 is a fire alarm pull station designed for manual activation of fire alarm systems. Pull stations serve as the primary manual initiation device in commercial and institutional fire alarm installations, allowing building occupants to trigger an alarm signal when a fire or emergency is detected. The 1000407-80 is sold as an individual unit and falls within the pull station product category, making it a field-replaceable or new-installation component for licensed fire alarm technicians and life-safety contractors.

This pull station is suited for fire alarm system installations where a manual call point is required. Pull stations of this type are typically found in commercial buildings, schools, healthcare facilities, and industrial sites. The unit is identified by the model designation RMS-6T-EXP-WP-LP-KL, which suggests an expanded, weatherproof configuration with low-profile and keyed-lock features, making it appropriate for demanding or exposed installation environments where standard indoor pull stations are not adequate.

Key Features

• Manual fire alarm initiation device for use in fire alarm systems
• Model designation indicates weatherproof construction suitable for outdoor or harsh-environment applications
• Keyed-lock feature helps prevent unauthorized reset or tampering
• Sold as a single unit for straightforward replacement or new installation
• Pull station product category — direct fitment in manual initiation circuit applications

Compatibility

Designed as an OEM-style manual pull station for fire alarm systems requiring a manual initiation device at a call point; no specific compatible panel or system model numbers were provided in the product data.

Installation Notes

Installation must be performed by a licensed fire alarm technician or life-safety contractor in accordance with NFPA 72 and all applicable local codes. De-energize the fire alarm control panel circuit before wiring or replacing the pull station. Mount at the code-required height and verify proper supervision and end-of-line resistor configuration before returning the circuit to service. Do not place the system back in normal operation without a full functional test of the manual initiation zone.