Plumb Shop MP2622PCLF Angle Stop Valve 5/8x3/8 Compression Chrome

Product Description

The PLUMB SHOP DIV BRASSCRAFT MP2622PCLF is a chrome-plated, lead-free angle supply stop valve designed for residential and light commercial plumbing applications. It features a 5/8 inch O.D. compression inlet and a 3/8 inch O.D. compression outlet with a 1/4-turn ball-style operation, allowing for fast shutoff without the gradual wear associated with multi-turn valves. The valve is rated for 1/2 inch nominal copper supply lines. Lead-free construction meets drinking water compliance requirements under applicable plumbing codes. Licensed plumbers and journeyman-level tradespeople install this fitting when servicing or replacing fixture supply connections.

This angle stop valve is suited for under-sink installations connecting copper supply risers to faucets, toilets, dishwashers, and similar fixtures requiring a 3/8 inch O.D. compression outlet. The chrome finish is appropriate for exposed locations where aesthetics matter. The 1/4-turn mechanism reduces service time during fixture replacement or emergency shutoff. Typical use is in residential kitchens, bathrooms, and utility spaces served by 1/2 inch nominal copper tubing runs.

Key Features

• 5/8 inch O.D. compression inlet x 3/8 inch O.D. compression outlet configuration
• 1/4-turn operation for rapid full open or full close without tools
• Lead-free construction for compliance with potable water regulations
• Chrome finish suitable for exposed under-sink installations
• Sized for 1/2 inch nominal copper supply lines
• Angle body design directs flow 90 degrees from wall supply to fixture riser

Compatibility

Designed as an OEM-style replacement angle stop for residential plumbing systems using 1/2 inch nominal copper supply lines with standard compression fittings.

Installation Notes

Installation is performed by a licensed plumber or qualified tradesperson. Shut off the main water supply and relieve line pressure before removing the existing stop valve. Compression fittings require no solder — seat the ferrule squarely and tighten the compression nut to snug plus a firm quarter turn; do not overtighten. Verify lead-free compliance requirements with local authority having jurisdiction before installation in potable water systems.