Plumb Shop MP2071PCLF 3/8 Od Compression Stop Valve Chrome

Product Description

The PLUMB SHOP DIV BRASSCRAFT MP2071PCLF is a straight supply stop valve designed for residential and light commercial plumbing applications. It features a 1/4-turn ball-style operation, allowing a technician to shut off water supply quickly and completely with a 90-degree handle turn. The inlet and outlet connections are both 3/8-inch OD compression fittings, making it compatible with standard copper or compatible tubing supply lines. The chrome finish provides corrosion resistance in exposed installations such as under-sink supply runs. This valve meets lead-free requirements, making it suitable for potable water systems where lead-free compliance is mandated.

This stop valve is used in residential and light commercial plumbing installations to control water supply to fixtures such as faucets, toilets, and similar low-pressure supply points. It is installed inline on the supply stub-out between the wall or floor supply line and the fixture supply hose. The straight configuration is used where the supply stub-out and the fixture inlet are in direct alignment. Licensed plumbers and plumbing contractors install this valve during new construction, renovation, and fixture replacement projects.

Key Features

• 1/4-turn operation for fast, reliable shutoff with minimal handle movement
• 3/8-inch OD compression inlet and outlet fittings for tool-friendly, solder-free connection
• Lead-free construction meets potable water compliance requirements
• Chrome finish suited for exposed under-sink and above-floor installations
• Straight body configuration for direct in-line supply runs

Compatibility

Designed as an OEM-style replacement or new-installation stop valve for residential and light commercial plumbing fixture supply lines using 3/8-inch OD compression connections.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and the IPC. Shut off the main water supply and relieve line pressure before removing any existing valve or fitting. Compression fittings require no solder but must be tightened firmly and evenly to form a proper seal — do not overtighten, as this can crack the compression sleeve. After installation, restore water pressure gradually and inspect all connections for leaks before closing up the service area.