Plumb Shop Div Brasscraft 453-050 S Trap 1-1/4 in

Product Description

The PLUMB SHOP DIV BRASSCRAFT 453-050 is a chrome plated brass S trap designed for lavatory floor drain installations. Built from 22 gauge brass tubing, it features a 1-1/4 inch outer diameter slip joint connection and a 20 inch overall length to bridge the distance between a lavatory drain outlet and a floor drain opening. The chrome finish provides corrosion resistance suitable for exposed under-sink applications. This fitting ships complete with a flange, nuts, and washers so a licensed plumber has all connection hardware in hand before beginning the repair or replacement.

This S trap is intended for residential lavatory drains that terminate at a floor-level drain opening rather than a wall drain stub-out. It is a direct slip joint assembly, meaning no solvent welding or compression fittings are required for the primary connections. The 20 inch tube length accommodates standard floor-to-drain distances in typical bathroom vanity configurations. Plumbers replacing aging or corroded drain traps on pedestal sinks or vanity installations will find this a common service part.

Key Features

• 22 gauge chrome plated brass construction for durability in wet environments
• 1-1/4 inch outer diameter slip joint sizing matches standard lavatory drain outlets
• 20 inch tube length sized for floor drain termination applications
• Includes flange, nuts, and washers for a complete installation without additional hardware
• Chrome finish suitable for exposed under-sink visibility

Compatibility

Designed as an OEM-style replacement S trap for residential lavatory drains with 1-1/4 inch slip joint connections terminating at a floor drain.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and the International Plumbing Code (IPC). Shut off the water supply and clear standing water from the drain line before disassembling the existing trap. Hand-tighten slip joint nuts first, then snug with channel-lock pliers — avoid over-tightening, which can crack the nuts or distort the brass tubing. After installation, run water and inspect all slip joint connections for leaks before closing up the cabinet or vanity enclosure.