Pferd 47801645 Mounted Flap Wheel 60 Grit 3/4 in

Product Description

The PFERD 47801645 is a mounted flap wheel designed for use with straight grinders in metal finishing and surface conditioning applications. Built with aluminum oxide abrasive on a cloth backing, it delivers consistent medium-grit stock removal across a wide range of metallic materials. The wheel measures 3/4 inches in outside diameter with a 3/8 inch face width and mounts via a 1/4 inch shank that extends 1-1/2 inches. It is rated for a maximum of 38,100 RPM, making it well suited for high-speed die grinder and straight grinder work. Machinists, fabricators, and maintenance technicians install this wheel for deburring, blending, and light grinding tasks on both ferrous and non-ferrous metals.

This mounted flap wheel is intended for use in industrial and job-site environments wherever a straight grinder is employed. Its coated aluminum oxide construction handles a broad material range including steel, stainless steel, cast steel, cast iron, brass, copper, and aluminum. The compact 3/4 inch diameter is well suited to bore finishing, slot cleaning, and contour work in tight or restricted access areas where larger wheels cannot reach. It is a common consumable in fabrication shops, maintenance facilities, and general metalworking operations.

Key Features

• Aluminum oxide abrasive on cloth backing provides durable, consistent cut on ferrous and non-ferrous metals
• 60 grit medium grade balances stock removal with surface finish quality
• 3/4 inch diameter and 3/8 inch face width allow work in confined areas and tight geometries
• 1/4 inch shank diameter fits standard collets on most straight and die grinders
• 38,100 maximum RPM rating supports high-speed grinder operation
• 1-1/2 inch shank length provides secure chuck engagement and stable rotation

Compatibility

Designed for use with straight grinders accepting a 1/4 inch shank collet. Rated for material applications including aluminum, annealed cast iron, brass, cast steel, copper, heat treatable steel, nodular cast iron, non-ferrous metals, stainless steel, and steel.

Installation Notes

This wheel is installed by a machinist or metal fabricator using a straight or die grinder with a compatible 1/4 inch collet. Always confirm the grinder free-speed does not exceed the 38,100 RPM marked on the wheel before mounting. Power down and disconnect the grinder from its power source before inserting or removing the shank. Follow applicable ANSI B7.1 safety standards for abrasive wheel mounting and use appropriate eye and face protection during operation.