Penn Machine 2501300301 45 Deg Elbow 1-1/4 in Socket Weld 3000 Lb

Product Description

The PENN MACHINE 2501300301 is a forged carbon steel 45-degree elbow designed for socket weld piping systems operating under high-pressure conditions. Rated at 3000 lb pressure class and manufactured to Schedule 80/XH wall thickness standards, this fitting is built for demanding industrial and commercial piping applications. With a nominal size of 1-1/4 inches and an outside diameter of 2.188 inches, it provides a reliable directional change in pressurized pipe runs. Licensed plumbers, pipefitters, and mechanical contractors install this fitting where a 45-degree offset is required in socket weld systems.

This elbow is suited for industrial process piping, mechanical rooms, and utility systems where high-pressure carbon steel socket weld fittings are specified. It conforms to ASME B16.11 and ASTM A105 standards and carries PED Certification along with Canadian Registration in all provinces, making it appropriate for use across both United States and Canadian project sites. The forged construction provides consistent grain structure and material integrity compared to cast alternatives.

Key Features

• 45-degree elbow geometry for directional pipe routing at moderate angles
• 3000 lb pressure class rating for high-pressure service
• Socket weld end style for full-penetration weld connection
• Forged carbon steel construction per ASTM A105
• Schedule 80/XH wall thickness rating
• ASME B16.11 compliant with PED Certification and Canadian Registration in all provinces

Compatibility

Designed as an OEM-style forged socket weld fitting compatible with 1-1/4 inch nominal Schedule 80/XH carbon steel piping systems rated to 3000 lb pressure class per ASME B16.11.

Installation Notes

Installation of socket weld fittings should be performed by a licensed pipefitter or plumber in accordance with applicable mechanical and piping codes, including ASME B31.3 for process piping where required. Isolate and depressurize the system completely before cutting into any existing pipe run. Socket weld connections require proper gap spacing between pipe end and socket shoulder before welding to allow for thermal expansion during the weld cycle. Post-weld inspection procedures should follow project specifications and applicable code requirements.

Technical Specifications

• Fitting Type: 45 Degree Elbow
• Nominal Size: 1-1/4 inches
• Outside Diameter: 2.188 inches
• End Style: Socket Weld
• Pressure Class: 3000 lb
• Schedule Rating: SCH 80/XH
• Material: Carbon Steel
• Method of Manufacture: Forged
• Series: 13003
• Weight: 1.23 pounds
• Standards and Approvals: ASME B16.11, ASTM A105, PED Certified, Canadian Registered in all provinces

Standard Information

• Brand: PENN MACHINE
• Manufacturer Part Number: 2501300301