Pemko 315DN36 Door Bottom Sweep 36 in Neoprene Dark Bronze

Product Description

The PEMKO 315DN36 is a door bottom sweep designed to seal the gap between the bottom edge of a door and the threshold or floor surface. Finished in dark bronze, it accepts a 7/16-inch neoprene insert that compresses against the floor to block drafts, dust, insects, and moisture infiltration. At 36 inches in length, it fits standard single-door openings straight from the package. This type of door bottom is installed by door hardware specialists, finish carpenters, or general contractors during new construction and renovation work where weathertight door assemblies are required.

The 315DN36 is suited for interior and exterior commercial and residential door applications where a low-profile, surface-mounted sweep is appropriate. It is commonly installed on wood or hollow-metal doors in office buildings, hotels, multifamily residential units, and light commercial construction. The dark bronze finish coordinates with matching door hardware and threshold systems. At 36 inches, it is sized for standard single-door leaf widths and can be trimmed to fit narrower openings where field cutting is needed.

Key Features

• 7/16-inch neoprene seal compresses against the floor to block drafts, dust, and moisture
• Dark bronze finish coordinates with standard commercial door hardware
• 36-inch length fits standard single-door openings and can be field-cut to width
• Surface-mounted design allows installation without door modification
• Lightweight aluminum body at 0.26 pounds minimizes load on door hinges

Compatibility

Designed as an OEM-style surface-mounted door bottom sweep for standard single-door leaf applications in residential and light commercial construction.

Installation Notes

Door bottom sweeps of this type are installed by door hardware technicians or carpenters. Before installation, ensure the door is properly hung and the gap at the door bottom is consistent across the full width. The sweep is typically fastened to the face of the door bottom using the provided mounting holes; verify fastener length is appropriate for the door material to avoid breakthrough on the opposite face. Field-trim the sweep to exact door width using a fine-tooth metal saw before final fastening.