Pelco Inc. ESCE1-2X40Q18-RLU-1 Ip Ptz Camera Thermal

Product Description

The PELCO INC. ESCE1-2X40Q18-RLU-1 is a dual-sensor IP PTZ camera combining a high-definition 40x optical zoom visible imager with a QVGA thermal imaging module. The thermal channel uses an 18mm lens to deliver a 12-degree field of view at a 9Hz frame rate, making it suited for continuous perimeter surveillance and detection in low-visibility or no-light conditions. The PTZ platform provides motorized pan, tilt, and zoom control for wide-area coverage from a single installation point. Licensed security integrators and surveillance technicians are the primary installers for this class of device.

This camera is designed for demanding outdoor or indoor security deployments where both thermal detection and high-resolution visible imaging are required in a single unit. Typical applications include critical infrastructure protection, perimeter monitoring, and site security where operators need to detect heat signatures and then zoom in with the HD visible channel for positive identification. The 9Hz thermal refresh rate is appropriate for slow-moving target detection in controlled-access or restricted-area environments.

Key Features

• Dual-sensor design with HD visible and QVGA thermal channels in one PTZ housing
• 40x optical zoom on the visible imager for long-range identification
• 18mm thermal lens with 12-degree field of view for focused perimeter detection
• 9Hz thermal frame rate suitable for surveillance and detection applications
• IP network interface for integration into digital video management systems
• PTZ motorized control enables pan, tilt, and zoom from a remote operator station

Compatibility

Designed for use in IP-based video surveillance systems as a PTZ camera endpoint. Specific compatible video management platforms, NVRs, or controller models were not provided in the available product data.

Installation Notes

Installation should be performed by a licensed security systems integrator or low-voltage technician familiar with IP camera commissioning. Power down and de-energize the network drop and any PoE switch port before making connections. Network configuration, including IP addressing and VMS integration, should follow the manufacturer commissioning documentation. Ensure the mounting surface and bracket meet the load rating required for this PTZ housing class.