Pass Seymour TSDCL303PTCCCV6 Toggle Slide Dimmer 300W

Product Description

The PASS SEYMOUR TSDCL303PTCCCV6 is a 3-pole toggle slide dimmer designed for controlling compact fluorescent lamp (CFL), LED, and incandescent lighting loads. Rated at 300 watts for CFL and LED sources and 700 watts for incandescent, it operates on 120 volts AC at 60 Hz. The unit ships in a package of six and features an ergonomic slider profile sized for easy adjustment in low-light conditions or during rapid service calls. This dimmer is intended for installation by licensed electricians working on residential or light commercial lighting circuits.

This dimmer is suited for 3-pole switching applications where a single light fixture or lighting zone is controlled from three separate locations. The white finish matches standard decorator wallplates. With dual-technology load compatibility covering both legacy incandescent and modern CFL and LED lamp types, it reduces the need for separate SKUs when retrofitting older incandescent circuits to energy-efficient lighting. Electricians will find it useful in residential hallways, stairwells, and commercial corridors where 3-way or 3-pole multi-location dimming control is required.

Key Features

• 300W maximum load rating for CFL and LED lamps
• 700W maximum load rating for incandescent lamps
• 3-pole configuration for multi-location dimming control
• Operates at 120 volts AC, 60 Hz
• Ergonomic slider designed for low-light adjustability
• White finish for standard wallplate compatibility
• UL listed

Compatibility

Designed as an OEM-style replacement or new-installation dimmer for 3-pole, 120-volt residential and light commercial lighting circuits using incandescent, CFL, or LED lamp loads.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC Article 404 and local jurisdiction requirements. De-energize the circuit at the breaker panel and verify absence of voltage with a meter before wiring. Do not exceed the rated wattage for the connected lamp type, as mixing load types beyond rated capacity can cause flickering or premature device failure. Confirm wallplate and junction box dimensions are compatible before mounting.