Pass Seymour S3713W Clock Hanger Receptacle 15A 125V Nema 5-15R

Product Description

The PASS SEYMOUR S3713W is a 15-amp, 125-volt clock hanger receptacle designed to mount flush against a wall while keeping a clock or similar device sitting flat without a visible cord drop. The receptacle includes a smooth wall plate and features a NEMA 5-15R configuration, making it a direct fit for standard 15-amp residential and light-commercial wiring circuits. The recessed offset outlet face allows a clock plug to seat behind the wall plate, eliminating the gap between the clock and the wall surface. This outlet is UL listed and packaged in a window box for easy inspection before installation.

This receptacle is used in residential bedrooms, living rooms, kitchens, and light-commercial spaces where wall-mounted clocks are installed. Electricians specify the S3713W when a finished look is required and a standard receptacle would cause the clock to protrude from the wall. The included smooth wall plate means no additional cover plate purchase is needed, simplifying the installation and keeping the job moving. The white finish coordinates with standard white decor trim throughout residential and hospitality applications.

Key Features

• Recessed clock hanger design keeps wall-mounted clocks flush against the surface
• Includes smooth white wall plate — no separate cover required
• NEMA 5-15R configuration for standard 15-amp branch circuits
• UL listed for safety compliance
• White finish for coordination with standard residential decor
• Window box packaging allows pre-purchase inspection of finish and configuration

Compatibility

Designed as an OEM-style replacement or new-installation clock hanger receptacle for standard 15-amp, 125-volt residential and light-commercial branch circuits wired to NEMA 5-15R specification.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC). Turn off the branch circuit breaker and verify the circuit is de-energized with a non-contact voltage tester before making any wire connections. The recessed outlet face requires a standard single-gang outlet box at the correct depth — verify box projection before securing the wall plate. Torque wire terminal screws to the value marked on the device body or as required by local code.