Pass Seymour LSCLDC163PWCCV4 Cfl Led Dimmer 300W 4-pack

Product Description

The PASS SEYMOUR LSCLDC163PWCCV4 is a combination CFL and LED dimmer with integrated fan speed control, packaged in a quantity of four. Rated at 300 watts for lighting loads and 1.6 amps for fan control, this device handles both dimming and fan speed adjustment from a single wallbox location. It is designed for residential and light-commercial wiring applications where compact fluorescent or LED fixtures share a circuit with a ceiling fan. Licensed electricians are the primary installers for this type of device under NEC requirements.

This dimmer-fan control combination is suited for bedroom, living room, and great room installations where a single gang location must serve both a dimmable light fixture and a ceiling fan motor. The 300-watt lighting capacity accommodates most standard CFL and LED fixture loads, while the 1.6-amp fan rating covers the majority of residential ceiling fan motors. The 4-unit pack is practical for new construction or multi-room renovation projects where several rooms require the same control configuration.

Key Features

• 300-watt maximum load rating for CFL and LED dimming
• 1.6-amp fan speed control integrated into a single device
• Handles both compact fluorescent and LED lamp types on one dimmer
• Packaged in a quantity of 4 units for multi-location installs
• Combination control reduces the need for two separate gang locations

Compatibility

Designed as an OEM-style replacement or new-installation dimmer-fan control for residential wallbox applications requiring simultaneous CFL or LED dimming and ceiling fan speed control.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. Turn off the circuit breaker and verify the circuit is de-energized before removing the existing switch or dimmer. Confirm the connected lighting load does not exceed 300 watts and that the fan motor does not exceed 1.6 amps before wiring. Do not use this device on incandescent-only or magnetic low-voltage circuits.