Pass Seymour CS15AC1WCC8 Toggle Switch 15A 120/277V 8 Pack

Product Description

The PASS SEYMOUR CS15AC1WCC8 is a commercial-grade single pole toggle switch rated at 15 amps and 120/277 volts. Built for specification-grade electrical installations, it features high-impact-resistant thermoplastic construction and a grounding design for reliable performance in demanding environments. The switch is tested to 25,000 on/off cycles, making it well suited for commercial and light industrial settings where durability matters. Licensed electricians installing in offices, schools, retail spaces, and similar occupancies will find this switch meets the elevated requirements of specification-grade work. Each unit ships in a window box and is sold in a package of 8.

This switch is intended for commercial and specification-grade electrical installations in residential, commercial, and light industrial applications. It is appropriate for use in standard single pole switching circuits where a 15A, 120/277V toggle switch is required. The side wire termination accepts 14 through 10 AWG stranded and solid copper wire, supporting a wide range of wiring scenarios common in commercial rough-in work. The 120/277V dual-voltage rating makes it suitable for both standard residential branch circuits and 277-volt fluorescent lighting circuits found in commercial buildings.

Key Features

• Rated 15A at 120/277V for use on standard and commercial lighting circuits
• Tested to 25,000 on/off cycles for long-term durability in high-use locations
• Side wire termination accepts 14 through 10 AWG stranded and solid copper wire
• High-impact-resistant thermoplastic body withstands job-site and installation stress
• Grounding design meets commercial and specification-grade installation requirements
• UL listed and CSA certified; meets Federal Specification standards
• Sold in a package of 8 units in window box packaging

Compatibility

Designed as a specification-grade single pole toggle switch replacement for commercial and residential electrical switching applications requiring a 15A, 120/277V device.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. Always shut off power at the circuit breaker and verify the circuit is de-energized with a voltage tester before wiring. Side wire termination screws should be tightened securely to ensure solid copper wire contact without over-tightening the terminal. Do not exceed the 14 through 10 AWG wire range specified for the terminal connections.