Pass Seymour 1594CS1M Portable Gfci Receptacle 15A 125V

Product Description

The PASS SEYMOUR 1594CS1M is a portable GFCI receptacle designed for temporary power applications where ground-fault protection is required at the point of use. Rated at 15 amps and 125 volts, this unit ships with a 1-foot cord set already attached, allowing it to plug directly into an existing outlet and provide protected downstream power. A manual reset button restores operation after a fault trip, and a green power indicator light gives a clear visual confirmation that the unit is energized and protection is active. Licensed electricians and electrical contractors install this type of device on job sites and in service environments where a permanent GFCI outlet is not present.

This portable GFCI receptacle is suited for residential and light commercial job sites, temporary construction power setups, and service applications where NEC requirements mandate ground-fault protection but a fixed GFCI outlet is unavailable. The 1-foot cord set makes it straightforward to deploy from any standard 15-amp, 125-volt outlet. It is packaged in units of six, making it practical for electrical contractors to stock for ongoing job-site use or resale.

Key Features

• Portable design with attached 1-foot cord set for plug-in deployment at any 15A, 125V outlet
• Provides ground-fault circuit interrupter protection at the point of use
• Manual reset button restores power after a fault event
• Green power indicator light confirms the unit is energized and protection is active
• Packaged six units per package for contractor stocking

Compatibility

Designed for use with standard 15-amp, 125-volt outlets in temporary or portable power applications requiring ground-fault protection per NEC guidelines.

Installation Notes

Installation and deployment of GFCI devices should be performed by a licensed electrician in accordance with applicable NEC requirements. Before connecting downstream loads, verify the outlet supplying this unit is properly grounded and rated for the intended load. Test the GFCI function using the built-in test and reset buttons before placing the unit into service. Do not exceed the 15-amp, 125-volt rating of this device.